AmbiScreen WiFiLED First start

AmbiScreen: Tags

If you have wifi connection issues check that your wifi network is 2.4GHz only, it has short alphanumeric wifi network name without special characters (like e.g.apostrophes).

After first start AmbiScreen Eye opens its own wifi access point. Connect to this “AmbiScreenWiFiLED” wi-fi network with password “ambiscreen33”. Navigate to via your web browser and setup your AmbiScreen Eye device via Settings page (count of LEDs, credentials for your home wi-fi ).
When you set your own wifi credentials for your home wifi click on Save. It is recommended to manually unplug device from power for 30 seconds and then power it again. If device is not able to connect to your home wifi, repeat this step or check wifi credentials. After initial value change power-cycling is recommended.

Once your device is set we recommend to use web app at to find all your devices. AmbiScreen Finder is able to locate AmbiScreen Eye and AmbiScreen WiFiLED in your network. You can place Finder to your mobile home screen via “Add to Home screen” button in mobile browser. Via Finder you can open AmbiScreen device in your network. Finder needs to be in the same network as Eye and WiFiLED – it means you need to open Finder on device (e.g. phone, computer, …) which is connected to the same network as Eye and WiFiLED.

Via Finder you can click on AmbiScreen devices and it shows you internal web app of WiFiLED (you can also navigate to it directly via IP in web browser the same way), or internal web app of Eye.